Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Characteristics
HL-5180 is a 100% solids, one-component, moisture-curable insulating glass sealant. HL-5180 brings the following to the IG industry:
- Throughput of hot melt sealants and strength of polyurethanes
- Very low argon transmission rate
- Meets and/or exceeds the requirements of ASTM E2190 and CGSB 12.8
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Usage Information
- Processing
Surfaces should be dry, clean, and free from dust or grease. A cleaning agent such as Körasolv GL and/or the glass and spacer manufacturer’s recommended procedures are appropriate for surface preparation. It is important to ensure that sealant is applied to the correct dimensions required for your application. Ensure recommended application temperature is maintained at the application nozzle to prevent cold joints and poor adhesion.
- Clean Up
Körasolv GL or common solvents such as methyl ethyl ketone (MEK) or acetone will clean uncured material.
- Cure Profile
This material cures in the presence of any moisture. A significant amount of strength is gained in the first 24 hours. >80% of the final strength is achieved in 7 days.
Properties
- Physical Form
- Typical Physical Properties
Value Units Test Method / Conditions Application Temperature 112 - 121 °C - Application Temperature 77 - 82 °C - Recommended Press Bond Temperature min. 135 °F GED APN-0189 Density 9.6 lb/gal - Tensile Strength 530 psi - Shear Strength 155 psi - Peel Strength 34 psi - Moisture Vapor Transmission Rate 2.8 g/m²day ASTM F-1249 Argon Permeability max. 10 cc/m²day Internal Test Method
Regulatory & Compliance
- Quality Standards
Safety & Health
- Safety Conditions
Avoid direct skin contact with uncured material. Extreme care should be exercised when working with hot or warm melts in their fluid state. Use eye protection and thermally protective clothing. Use in a well-ventilated area and do not exceed 250°F.
Packaging & Availability
- Regional Availability
- Packaging Information
- 55 gal straight-sided drum, 450 lb (204.12kg)
- 5 gal pail, 40 lb (18.14kg)
Storage & Handling
- Shelf Life
- 9 months
- Storage and Shelf Life Conditions
Store in a cool, dry, clean place. Packaging must be kept sealed and protected from moisture. Product may be stored in this manner for 9 months from date of manufacture