H.B. Fuller HL5130

Identification

GBU

BAS

RTU Product Type

Hot Melt Adhesive,

1K (1 component) Sealant,

Solvent free (100% Solids) Sealant

Categories

Markets → Building & Construction → Applications → Building Envelope & Roofing → Glazing & Window Elements

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Hot Melt Nonreactive Adhesives

Technologies → Adhesives & Sealants → Product Families → Sealing Technology → 1K (1 Component) Sealants

Technologies → Adhesives & Sealants → Product Families → Sealing Technology → Solvent-free Sealants

Applications

Application Area

Windows,

Insulating Glass,

Spacer

Compatible Substrates & Surfaces

Glass

Applications & Uses

Usage Information

• Processing

Surfaces should be dry, clean, and free from dust or grease. A cleaning agent such as Körasolv GL and/or the glass and spacer manufacturer’s recommended procedures are appropriate for surface preparation. It is important to ensure that sealant is applied to the correct dimensions required for your application. Ensure recommended application temperature is maintained at the application nozzle to prevent cold joints and poor adhesion.

• Clean Up

Körasolv GL or common solvents such as mineral spirits or acetone.

Features

Ready-to-Use Product Features

Excellent Moisture Resistance,

Excellent Substrate Adhesion,

Good Adhesion,

Good Barrier Properties,

Intercept

Features & Benefits

Product Characteristics

HL-5130 is a 100% solids, one-component insulating glass sealant engineered for exceptional adhesion to IG glass and spacer as well as strong barrier properties. HL-5130 brings the following to the IG industry:

• Excellent adhesion to insulating glass components
• Flexibility of use with any IG manufacturing system
• Meets and/or exceeds ASTM E2190 and CGSB 12.8 standards

Packaging & Availability

Regional Availability

• North America

Packaging Information

• 55 gal straight-sided drum, 475 lb (215.46 kg)
• 5 gal pail, 39 lb (17.69 kg)
• 8”x6”x4” cake, case of 8, 50 lb (22.68 kg)
• 8”x41⁄4”x3” cake, case of 18, 50 lb (22.68 kg)

Physical Properties

Physical Form

Solid

Properties

Application Temperature:

105.0~115.0 °C

Density:

1174.334 kg/m³

Shear Strength:

0.37206 MPa

Shelf Life:

24.0 months

Specific Gravity:

1.17502

Tensile Strength:

0.3243 MPa

Typical Physical Properties

	Value	Units	Test Method / Conditions
Application Temperature (hand gun/automated line)	185 - 196	°C	-
Application Temperature (linear extruder)	105 - 115	°C	-
Argon Permeability (argon gas)	100	cc/m²day	Internal Test Method
Density	9.8	lb/gal	-
Moisture Vapor Transmission Rate	0.64	g/m²day	ASTM F-1249
Peel Strength (at 73°F, glass/aluminium, climbing drum)	32	psi	-
Recommended Press Bond Temperature	min. 200	°F	GED APN-0189
Shear Strength (at 73°F, aluminium/aluminium)	42	psi	-
Tensile Strength (100% elongation)	47	psi	-

Regulatory & Compliance

Quality Standards

ASTM E2190,

CGSB 12.8

Safety & Health

Safety Conditions

Extreme care should be exercised when working with hot or warm melts in their fluid state. Use eye protection and thermally protective clothing. Use in a well-ventilated area and do not exceed 450°F.

Storage & Handling

Storage and Shelf Life Conditions

Store in a cool, dry, clean place. Packaging must be kept sealed and protected from moisture. Product may be stored in this manner for 24 months from date of manufacture.

Shelf Life

24 months