Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Application and Equipment Suggestions
Suitable two part metering and mixing equipment is available. Contact your H.B. Fuller representative for suggested application equipment to suit your specific needs.
- Surface Preparation
Surfaces must be clean, dry and free from grease, oil, paint, wax and weak oxide films and other surface contaminants. Chemical etching, sanding or grit blasting often give the best results.
- Proportioning and Mixing
Just prior to using, blend the two components, Part A and Part B, in the ratio above. Stir the two components together thoroughly, being certain to scrape in all material from the walls and bottom of the mixing container. Materials can be hand stirred. Mechanical mixing is preferrable, but should be carried out at slow speeds (about 300 rpm), taking as little air as possible into the adhesive batch.
Properties
- Color (Properties)
- Odor
- Ammonia (Part B)
- Component A
Value Units Test Method / Conditions Blending Ratio (by volume) 100.0 - - Blending Ratio (by weight) 100.0 - - Density (Part A) 9.25 lb-mass/gal ASTM D0792 Non- Volatiles Solids Content 100.0 % - Viscosity 1000.0 cP TMTS001 - Component B
Value Units Test Method / Conditions Blending Ratio (by volume) 54.0 - - Blending Ratio (by weight) 50.0 - - Density (Part B) 8.6 lb-mass/gal ASTM D0792 Non- Volatiles Solids Content 100.0 % - Viscosity 450.0 cP TMTS001 - Technical Data
Value Units Test Method / Conditions Density 9.02 lb-mass/gal ASTM D0792 Gel Time (for 149 - 151 gram) 37 - 47 min - Hardness 77 - 87 - Shore D
Storage & Handling
- Shelf Life
- 365 Days (Component A), 365 Days (Component B)
- Storage Conditions
Store FE7258A/B in a dry place at preferably 60-85 degrees Fahrenheit or 15-30 degrees Celsius.