Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- General Instructions
- Surfaces to be bonded should be clean and dry and free of grease. Product should be applied in enough quantity to fill all engaged threads or gap. The product performs best in thin bond gaps. Very large gaps may create gaps that will affect the cure speed and overall strength. Good contact is essential.
- This product is not recommended for use in pure oxygen environments and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. It is recommended to confirm compatibility of the product with all substrates prior to use.
- Curing Performance
The rate of cure will depend on environmental conditions and the substrates used. The gap of the bond line will affect set speed. Smaller gaps tend to increase set speed. Activators may be applied to further improve set speed, but may also impair overall adhesive performance.
Properties
- Physical Form
- Appearance
- White
- Soluble in
- Acetone (at 55°C)
- Uncured Properties
Value Units Test Method / Conditions Handling Strength 5 - 50 min - Functional Strength 1 - 3 h - Gap Fill 0.003 - 0.015 inch - Viscosity 350000.0 cP - Specific Gravity 1.2 - - Full Cure Conditions 6 - 12 h - Pressure Resistance 10 - 20 in-lb - Service Temperature 10000.0 psi - Shear Strength - 50 - 230 °C ISO 10123
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Condition
Products should be stored unopened in a cool, dry place out of direct sunlight. Products may be refrigerated for improved shelf life, but should be brought back to room temperature before use.