Enhanced TDS
Identification & Functionality
- Product Type
- Country of Origin
- Australia
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Benefits of Corewinding Application
- Up to a 25% reduction in applied adhesive
- Line speeds of 60+ cores/min
- Ability to bond a wide range of corestock material
- Ability to use one adhesive for both one- and two-ply cores
- High wet tack solutions allow for easier coremaking startups, reducing waste
- High tack solutions can also help to eliminate the need to run an overlap, thus reducing paper expense
- Adhesives designed to help with machine hygiene
- Boric acid-free options
- Solutions that are proven in all application systems: Wheel & Doctor blade, Slot extrusion, Flood coat
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Application Information
Fullabond M100 CORE is designed to be applied by wheel and runs on most types of carton sealing and core winding equipment.
Clean up adhesive while wet with warm water.- Limitations
Check machine and material compatibility prior to commercial use.
Properties
- Typical Properties
Value Units Test Method / Conditions Viscosity 3,500 - 4,000 cps - Solids Content 48 - 53 % -
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 6 months
- Storage Condition
Product should be stored in the original container out of direct sunlight between 5°C and 30°C and protected from freezing. Rotate stock using oldest batches first. Close containers air tight after use.