Enhanced TDS
Identification & Functionality
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Features
- Excellent adhesion and high bonding strength
- Excellent bonding to porous and non-porous surfaces
- Suitable for material under tension
- Wide range of applications
- Excellent heat resistance
- Chemical resistant
- High coverage
- Fast drying
- High tack
- Low odor
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Product Applications
- ENIFIX 350 is an ideal product for bonding of leather, shoe material, composite panels, wood & aluminum items, steel, plastic rubber sheets and carpet backings.
- ENIFIX 350 is also suitable for EPDM, rubber, veneer, cork, laminates, PVC skirting, protection board, felt, fiber, etc.
- ENIFIX 350 can also be used for handicraft work and repairing shoes, bags & toys.
- Application Procedure
The surface should be structurally sound, clean, dry, levelled and free from dust, curing compounds, grease and other loose debris. Keep container closed when not in use.
Apply ENIFIX 350 evenly with a brush or roller evenly on both surfaces, wait until the solvent has fully evaporated. If the material is porous, apply a second coat of ENIFIX 350 and let it dry. After the evaporation of the solvent in adhesive, assemble the surface by applying normal hand pressure. Special care must be taken on the edges and adhesive must be evenly applied.
Note: The adhesive and the parts to be bonded must be at room temperature for optimum results (do not use below 10°C). The relative humidity must be below 65% to avoid formation of bubbles in the final product. The final bonding strength will depend on the pressure applied. Therefore, press across the entire surface as firmly as possible.
Properties
- Physical Form
- Appearance
- Yellow Liquid
- Specifications
Value Units Test Method / Conditions Specific Gravity 0.81 - 0.91 kg/ltr ASTM D 1475-98 Solid Content 19 - 23 % ASTM D 1644-01 Viscosity 1400 - 1800 cPs ASTM D 2196 Temperature Resistance - 40 - 110 °C - Coverage Range (subject to surface condition) 4 - 6 m2/ltr -
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
650 ml Metal Can (12 pcs per box).
Storage & Handling
- Shelf Life
- 12 months
- Storage Conditions
- 12 months from date of manufacturing in original unopened containers.
- Store under cover, protect from direct sunlight and high temperature.
- Store product at 10°C to 35°C for maximum storage life. Higher temperatures reduce normal storage life.
- Lower temperatures may cause increased viscosity of a temporary nature.
- Rotate stock on a “first in-first out” basis.