Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Features
- Excellent Adhesion and High Bonding Strength
- Excellent Bonding to Porous and Non-Porous Surfaces
- Suitable for Material under Tension & Permanently Flexible
- Wide range of Applications
- Excellent Heat Resistance
- Instant Load Bearing
- Chemical Resistant
- Very Low Odor
- Excellent Tack
- Fast Drying
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Product Applications
- ENIFIX 333 is an ideal product for bonding PVC skirtings, veneer, hardboard, Formica, linoleum, leather, rexine, rubber, cork, textile or polyester foam to self and to wood, chipboard, metal and concrete.
- ENIFIX 333 is also an excellent product for bonding carpets, stair carpets, furniture tips and felt patches.
- ENIFIX 333 can also be used for bonding shoes, toys and handicrafts.
- Application Procedure
The surface should be structurally sound, clean, dry, levelled and free from dust, curing compounds, grease and other loose debris.
Apply ENIFIX 333 evenly with a brush or roller evenly on both surfaces, wait until the solvent has fully evaporated. After the evaporation of the solvent in adhesive, assemble the surface by applying normal hand pressure. Special care must be taken on the edges and adhesive must be evenly applied.
Note: The adhesive and the parts to be bonded must be at room temperature for optimum results (do not use below 10°C). The relative humidity must be below 65% to avoid formation of bubbles in the final product. The final bonding strength will depend on the pressure applied. Therefore, press across the entire surface as firmly as possible.
Properties
- Physical Form
- Appearance
- Yellow Liquid
- Specifications
Value Units Test Method / Conditions Specific Gravity 0.80 - 0.90 kg/ltr ASTM D 1475-98 Solid Content 18 - 22 % ASTM D 1644-01 Viscosity 2500 - 3000 cPs ASTM D 2196 Temperature Resistance - 40 - 70 °C - Coverage Range (subject to surface condition) 2 - 4 m2/ltr -
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
650 ml Metal Can (12 pcs per box).
Storage & Handling
- Shelf Life
- 12 months
- Storage Conditions
- 12 months from date of manufacturing in original unopened containers.
- Store under cover, protect from direct sunlight and high temperature.
- Store product at 10°C to 35°C for maximum storage life.
- Higher temperatures reduce normal storage life.
- Lower temperatures may cause increased viscosity of a temporary nature.
- Rotate stock on a “first in-first out” basis.