DURABOND PA 1936

• Good Adhesion on Paper Surface
• Good Wet Tack

• Up to a 25% reduction in applied adhesive
• Line speeds of 60+ cores/min
• Ability to bond a wide range of corestock material
• Ability to use one adhesive for both one- and two-ply cores
• High wet tack solutions allow for easier coremaking startups, reducing waste
• High tack solutions can also help to eliminate the need to run an overlap, thus reducing paper expense
• Adhesives designed to help with machine hygiene
• Boric acid-free options
• Solutions that are proven in all application systems: Wheel & Doctor blade, Slot extrusion, Flood coat

General use for tube winding or core winding, also applicable for carton side seaming.

General paper, paperboard and corrugated carton substrates.

Durabond PA 1936 is ready for use. Surfaces to be bonded must be clean, dry and free from dust, oil, grease and dirt. Product should be stirred before use and do not mix with other adhesives. For best result, it is recommended to be used within the shelf life.

Whenever possible, clean up the adhesive before it dries using water. If dry, use water or by mechanical scrapping.

In original sealed packaging protected from sun, dust, moisture and high temperatures. Clean and dry conditions above 10°C and below 35°C.