Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Characteristics
The characteristics of this product are as follows:
- Low density hot melt adhesive designed to deliver high quality performance at reduced add-ons.
- Fast speed of set
- Low color and odor
- Good thermal stability
- Clean machining
- Good adhesion performance over a wide temperature range
- Application Information
- Excellent performance on high-speed production lines
- Reliably consistent performance that enables your production team to focus on higher-value tasks
- Strong bonding performance using significantly less adhesive
- Close the same number of cases using at least 25% less adhesive
- Reduced usage on every case reduces the CO footprint impact
- Internal studies show 100kg of adhesive bonds 89,000 cases, saving the CO₂ equivalent of a 715km truck journey
- Indicative comparisons show significant reductions
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
Application temperature is 160 - 180 ̊C. Maintain pre-melting tank at 3⁄4 full. Avoid sudden condition of excessive solid hot melt as this will lower the tank temperature significantly. Surface to be bonded must be clean, dry and free from dust, oil, grease and dirt. Do not mix with other adhesives.
Properties
- Physical Form
- Appearance
- White Pastille
- Typical Properties
Value Units Test Method / Conditions Viscosity (at 177°C ,at 100 rpm, spindle 27) 900 - 1,240 cps RVDV II Viscometer Molten Gardner Color 0 - 2 - Application Properties
Value Units Test Method / Conditions Application Temperature 160 - 180 °C -
Safety & Health
- Safety Information
To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize the risk of flammable vapors, do not exceed a melt temperature above 400°F. Prevent the build-up of vapors. Extinguish all sources of ignition during hot melt use.
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 24 months
- Storage Information
This product is stored under clean and dry conditions below 40°C.