Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Characteristics
- transparent and odourless in molten state
- excellent heat stability
- bonds a variety of difficult to bond surfaces
- clean cut, no stringing, no "spinning"
- bond demonstrates good deep freeze and excellent heat resistance
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Typical Applications
It has been developed for case & carton sealing, folding box cartons, tray erection and straw attachment. It bonds a variety of difficult to bond surfaces and is well suited for warm storage.
- Application Instructions
- Apply by nozzle, wheel, disc, or Dauber finger systems.
- Application Temperature: 150°C – 190°C
- This hot melt is not compatible with conventional hot melts. If other adhesives have been used before, the adhesive equipment must be cleaned thoroughly.
- The prills product format is suitable for use in automatic feeder systems. Push bags to loosen up granules to remove blocking due to storage before filling the reservoir and ensure surrounding does not exceed +35°C.
- Suitable Substrates
Case & carton, trays, folding boxes – under export conditions.
Properties
- Typical Properties
Value Units Test Method / Conditions Viscosity (Sp21, at 175°C) approx. 1000 mPa.s ASTM D 3236-88, Brookfield Softening Point approx. 110 °C R&B - ASTM E28-99 Density (at 23°C) approx. 0.96 g/cm³ - Film Hard, elastic, dry - - - Note
* Typical values only, slight variations may occur but will not affect product’s meeting the standard technical parameters as stated
Storage & Handling
- Shelf Life
- 24 months
- Storage Conditions
This product is stored in original sealed packaging protected from sun, dust, moisture, and high temperatures.