Swift®tak 48432
1 of 67 products in this brandSwift®tak 48432 is a water-based adhesive known for its market-proven, good all-around performance on all application systems. Swift®tak 48432 is commonly used in tail tie applications for bath tissue and paper towel production in the paper converting market.
RTU Product Type: Tail Tie Adhesive, Waterborne Adhesive
Application Area: Bath Tissue, Paper Converting, Paper Towel
Compatible Substrates & Surfaces: Paper, Sheet
Application Method: Extrusion, Spray
Features: Good Release Properties, Non Staining
-
Type Document Name
-
Sell SheetH.B. Fuller Tail Tie Application Sell Sheet
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Segment
Applications & Uses
- Product Applications
-
- Lower temperatures than recommended can cause higher viscosity which result in reduced bond strength and reduced wetting.
- Depending on the construction of the equipment, a continuous heat- ing above processing temperature can cause decomposition of the adhesive.
- Tank melters should use pro- tective gases with < 5 ppm humidity, only.
- Clean tools immediately after use. Once cured, the material can only be removed mechanically.
Features
- Ready-to-Use Product Features
Features & Benefits
- Product Highlights
-
- 95% reduction in roll waste
- 50% reduction in applied adhesive
- Downtime reductions of three hours per week for unscheduled cleanup
- Downtime reduction due to fewer downstream wrapper jams
- Proven solutions for Futura rewinders to address buildup in winding nest 90% reduction in customer complaints due to over-penetration or poor release.
- Line speeds increase of 100 fpm; less “ironing” required
- Formulated to provide 100% release
- Ability to optimize release while maintaining tail control
- Adhesives designed to improve machine hygiene
Successful history of tail control on:
- Bath tissue
- Kitchen towel
- Hardwound towel
- Jumbo roll tissue
Solutions that are proven in all application systems:
- Plate and pan
- Wire and pan
- Linear extrusin
- Spray
Packaging & Availability
- Regional Availability
Properties
- Technical Data
-
Value Units Test Method / Conditions Density 1.007 g/cm³ - Solid Content 8 v% - Storage Temperature 18.3 - 29.4 °C - Viscosity (26.1°C, Sp. 5, 20 rpm) 3700 mPa·s - pH 7 - -
Storage & Handling
- Shelf Life
-
9 months