RBUV258Z
1 of 11 products in this brandRBUV258Z is a medium viscosity, tack-free LED-cured adhesive and coating. It is designed for applications where a clean, durable bond is required. RBUV258Z significantly enhances the curing speed for bonding the outer wrap of reverse osmosis membranes.
Chemical Family: Acrylics & Acrylates
Features: Medium Viscosity, Tack-free, UV Curable
Enhanced TDS
Identification
- Chemical Family
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Segment
Applications & Uses
- Product Application Instructions
-
- Surfaces to be bonded should be clean and dry. Dispense a drop or drops to one surface only. Apply only enough to leave a thin film layer after compression. Press parts together and expose to energy when ready. An adequate bond will develop rapidly, depending on UV dose efficacy, and maximum strength is achieved when the adhesive reaches full cure. Bonds should be allowed to cool before applying any stress.
Features
- Ready-to-Use Product Features
Packaging & Availability
- Regional Availability
Physical Properties
- Physical Form
- Appearance
-
Clear liquid
Properties
- Curing Performance
-
Photoinitiation initiates the curing process. Handling strength is reached in a short time, and will vary based on UV dose efficacy, environmental conditions, bond line gap, and other factors.
- Uncured Properties
-
Value Units Test Method / Conditions Base Compound Modified acrylate - - Specific Gravity 1.08 - - Viscosity 650 - 950 cPs - - Cured Properties
-
Value Units Test Method / Conditions Optimum Wavelength (optimum) 365 - 395 nm - Shore Hardness 76 - 78 - - Storage Temperature (in darkness) 8 - 21 °C - - Appearance
-
Clear liquid
Storage & Handling
- Storage Information
-
- Products should be stored unopened in a cool, dry place out of direct sunlight. Products should be kept at room temperature away from direct light. Protect from extreme heat or cold, optimum temperature is between 8°C and 21°C.
- Shelf Life
-
12 months