Cyberbond 2010

Identification

Chemical Family

Cyanoacrylates

GBU

HHC

RTU Product Type

1K (1 component) Adhesive,

Reactive Adhesive,

Solvent free (100% Solids) Adhesive,

Instant Adhesive

Categories

Markets → Automotive & Transportation → Applications → Bonding & Assembly → Transportation Assembly

Markets → Building & Construction → Applications → Building Materials → Construction Adhesives

Markets → Electrical & Electronics → Applications → Packaging & Assembly → Adhesives & Sealants

Markets → Healthcare & Pharma → Applications → Medical → Medical Devices & Assemblies

Markets → Industrial → Applications → Chemical & Industrial Manufacturing → Industrial Adhesives & Sealants

Technologies → Adhesives & Sealants → Product Families → Bonding & Sealing Chemistry → Elastomeric Adhesives & Sealants

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → 3K Liquid Reactive Adhesives

Application Information

Cure Method

Moisture Cure

Applications

Application Area

Medical Devices,

Industrial Assembly,

Automotive Applications,

Construction Applications,

Transportation Application,

Electronic Assemblies

Compatible Substrates & Surfaces

Metal,

Plastics,

Wood,

Aluminum,

Elastomers & Rubbers,

Titanium,

Nickel,

Stainless Steel,

Galvanized Steel,

Ethylene Propylene Diene Monomer (EPDM),

Aluminum Alloys,

Alloy Steel,

Nitinol

Segment

Medical

Features

Ready-to-Use Product Features

Fast Setting,

General Purpose,

Low Viscosity,

Fast Bonding

Packaging & Availability

Regional Availability

• North America

Properties

Shear Strength:

20.1188 MPa

Viscosity:

110 cps

Note

*** Performance of cured adhesive on Stainless Steel

Typical Properties

	Value	Units	Test Method / Conditions
Fixture Time	20	seconds	-
Service Temperature	- 55 to95	°C	-
Shear Strength***	2920	psi	-
Temperature Range	-67 to 203	°F	-
Viscosity (max. 20°C, 158 s⁻¹)	95 - 200	mPa.s	Cone-Plate Viscometer

Processing Properties

	Value	Units	Test Method / Conditions
Setting Time (ABS)	2 - 4	s	-
Setting Time (EPDM)	5 - 10	s	-
Setting Time (Steel)	5 - 40	s	-
Setting Time (wood beech)	min. 40	s	-

Technical Data

	Value	Units	Test Method / Conditions
Density	1.06	g/cm³	-
Viscosity (at 20°C, 158 s⁻¹)	95 - 200	mPa·s	Cone-Plate Method

Application Properties

	Value	Units	Test Method / Conditions
Relative Humidity	40 - 70	%	-

Uncured Properties

	Value	Units	Test Method / Conditions
Flash Point	82.5	°C	-
Set Time (Acrylonitrile Butadiene Styrene)	2 - 4	s	-
Set Time (Beech wood)	min. 40	s	-
Set Time (Ethylene Propylene Diene Monomer)	5 - 10	s	-
Set Time (steel)	5 - 40	s	-

Cured Properties

	Value	Units	Test Method / Conditions
Cure Time (full)	24	hours	-
Service Temperature Range	- 55 to 95	°C	-

Regulatory & Compliance

Certifications & Compliance

ISO 10993,

ISO 13485

Storage & Handling

Shelf Life

12 months (at 20°C, unopened)