HS Butyl 0305

Identification

Chemical Family

Butyl Rubber

GBU

BAS

RTU Product Type

Tape

Categories

Markets → Building & Construction → Applications → Building Envelope & Roofing → Waterproofing & Weatherproofing

Technologies → Adhesives & Sealants → Product Families → Pressure Sensitive Adhesives, Tapes & Labels → Tapes

Applications

Application Area

Seam Sealing,

Vehicles,

Frame Sealing,

Compression Joints,

Flange Joints

Applications & Uses

Application Instructions

Surface preparation

• All surfaces should be clean, dry, and free from frost, grease, and loose materials.
• When cleaning contaminated substrates, HS Butyl recommends using propan-2-ol (IPA) and allowing it to dry before applying the butyl tape.

Application

• Apply directly from the reel onto one surface and press along its entire length to ensure good initial adhesion.
• Remove the backing paper, position the other surface onto the sealant, and push firmly to seal across the joint.

Product Application

• For use as an air, dust or water seal for compression joints and seams.
• For water sealing applications in vehicle construction.
   

Features

Ready-to-Use Product Features

Conformable,

Flexible,

Good UV Resistance,

High Performance,

Ease Of Use,

Excellent Multi-Substrate Adhesion,

High Tack

Features & Benefits

Product Features

• Good adhesion to a wide range of substrates.
• Good UV resistance.
• The softer composition makes this product highly conformable.
• Easy and accurate to use with little waste and no mess.
• High tack.
• Remains flexible throughout its service life.
   

Packaging & Availability

Regional Availability

• Asia Pacific
• Europe
• Global
• North America
• Latin America
• India/MiddleEast/Africa (IMEA)

Packaging Information

HS Butyl 0305 is normally supplied as an extruded strip on a siliconised release paper. A wide range of dimensions can be supplied. Product dimensions will determine the number of rolls per carton.

Properties

Product Tolerance

Rectangular sections:

• Thickness: ±10%

Width:

• Up to 25mm: ±1mm
• 26mm to 100mm: ±2mm
• Over 100mm: ±3mm

Bead sections:

• Thickness: ±10%
• Width: ±10%

Performance Properties

	Value	Units	Test Method / Conditions
Density	1.6	g/cm³	HS Butyl Test Method 6
Dynamic Shear Strength	12	N/cm²	HS Butyl Test Method 15
Dynamic Shear Strength	32	N/cm²	HS Butyl Test Method 5
Nominal Service Temperature	-40 to 90	°C	-
Peel Strength (180° peel adhesion)	9	N/cm	HS Butyl Test Method 41
Peel Strength (90° peel adhesion)	8	N/cm	HS Butyl Test Method 48
Water Vapor Transmission Rate	0.14	g/m²/24h/mm	BS ISO 15106, ISO 9932

Application Properties

	Value	Units	Test Method / Conditions
Application Temperature	5 - 40	°C	-

Regulatory & Compliance

Certifications & Compliance

ISO 9001

Storage & Handling

Storage Condition

24 months when stored flat in original packaging in cool, dry conditions.

Shelf Life

24 months