Gel-Tac® 114C
1 of 4 products in this brandGel-Tac® 114C is a water-based microsphere adhesive designed for paper applications that require clean removability. It is specifically formulated for direct coating onto paper substrates using conventional methods.
RTU Product Type: Waterborne Adhesive
Compatible Substrates & Surfaces: Paper
Application Method: Gravure Coating, Meyer Bar
Features: Easily Wipe-Off, Low Tack, Water-based
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
Applications
- Application Method
- Compatible Substrates & Surfaces
- Segment
Applications & Uses
- Application Instructions
-
- Application type: gravure or mayer bar coating.
- This product may separate over time; this is typical for this adhesive.
- Mix before use; adhesive will redisperse with mild agitation.
- Check the pH in open coating pans and adjust to 9.5 with ammonium hydroxide solution if necessary. If the pH of the adhesive decrease below 8.8, coagulation may occur.
- Avoid use high speed centrifugal pumps.
- Typical Application
-
- Specifically designed for applications for direct coat onto paper substrates, using conventional methods.
- Recommended coat weight range: 8 - 15 gsm (dry)
Features
- Ready-to-Use Product Features
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Condition
-
In original sealed packaging protected from sun, dust, moisture, and high temperatures. Clean and dry conditions above +5°C and below +30°C.
- Shelf Life
-
6 months