Magik 3036 AF

Identification

GBU

BAS

RTU Product Type

Waterborne Coating,

Insulating Coating,

Lagging Adhesive,

Lap Adhesive

Categories

Markets → Automotive & Transportation → Applications → Automotive → Cooling & Climate

Markets → Industrial → Applications → Chemical & Industrial Manufacturing → Equipment & Parts

Technologies → Ready-to-Use Products → Product Families → Paints & Coatings → Protective Coatings

Applications

Application Area

Pipes,

HVAC Ducts,

Duct Liner,

Air Conditioners,

Equipment,

Seals,

Joints

Application Method

Brush,

Spray

Compatible Substrates & Surfaces

Glass Cloth,

Canvas

Applications & Uses

Application Procedure

The surface should be structurally sound, clean, dry, leveled and free from dust, curing compounds, grease and other loose debris. Keep container closed when not in use.

Apply MAGIK 30-36 AF at 1 - 1.7 m2 / liter (subject to surface condition). It is very important to ensure that each coat of MAGIK 30-36 AF is totally cured before the next coat is applied. The dry film thickness will vary with fabric selected. Use clean paint brushes which are suitable for water based paints. Apply with full brush and spread out evenly.

Product Applications

MAGIK 30-36 AF is used for outdoors as well as indoors-thermal insulation material on metal duct, in areas where high humidity and elevated temperature are major problems. MAGIK 30-36 AF is an ideal product to prevent mold and fungus growth. MAGIK 30-36 AF may be applied to the joints or edges of fibrous duct liner insulation to seal and prevent air erosion.

Features

Ready-to-Use Product Features

Abrasion Resistant,

Excellent Toughness,

Flame Resistant,

Fungus Resistant,

Low Emissions,

Low VOC,

UL Flame Rated,

UV Resistant,

Water Resistant,

Good Washability,

Water-based,

Mold Resistance,

Anti-Bacterial,

Anti-Fungal

Features & Benefits

Labeling Claims

Lead-free,

Non-Toxic,

Asbestos-free,

Non-Flammable,

Mercury-free

Product Features

• Zero Flame spread and Smoke developed
• Excellent Adhesion and High Strength
• Mold and Fungus resistant
• Washable and Water Resistant
• Non-Toxic and Non Flammable
• UV Resistant
• Antibacterial
• Doesn't get discolored with age

Packaging & Availability

Regional Availability

• India/MiddleEast/Africa (IMEA)

Packaging Information

5 USG Plastic Pail

Physical Properties

Physical Form

Paste

Appearance

White thixotropic paste

Properties

Product Properties

• VOC Content - Meets requirements for LEED IEQ 4.2, Low Emitting Materials, Paints & Coatings.
• Coverage Range (subject to surface condition): Wet coverages shown below are for smooth non-porous surfaces. Porous or rough surfaces may require more litres to obtain required dry thickness. 1 - 1.7 m2 /ltr per coat to obtain wet film thickness of 1 - 0.5 mm per coat.

Specifications

	Value	Units	Test Method / Conditions
Coverage	1 - 1.8	m²/L	-
Density	1.20 - 1.50	kg/L	ASTM D 1475-98
Drying Time (set to touch)	2 - 3	hours	ASTM D 1640
Drying Time (through dry)	15 - 17	hours	ASTM D 1640
Film Thickness (wet film, per coat)	0.5 - 1	mm	-
Service Temperature (temperature at coated surface)	- 20 to 100	°C	-
Solid Content	61 - 65	%	ASTM D 1644
Storage Temperature	10 - 40	°C	-
Viscosity	35000 - 60000	cPs	ASTM D 2196
Volatile Organic Compound Content	max. 12	g/L	ASTM D 2369-98
Water Vapor Permeance (at 0.030 inch dry film thickness)	0.4 - 1.3	perm	ASTM F1249

Appearance

White thixotropic paste

Regulatory & Compliance

Quality Standards

NFPA 90A,

MIL-A-3316C,

NFPA 90B 25/50

Storage & Handling

Storage Conditions

• 12 months from date of manufacturing in original unopened containers.
• Store product (10°C - 40°C) for maximum storage life.
• Higher temperatures reduce normal storage life.
• Lower temperatures may cause increased viscosity of a temporary nature.
• Rotate stock on a “first in-first out” basis.
• Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.

Shelf Life

12 months

Thermal Properties

Flame Rating

UL 723