FLX 570
1 of 6 products in this brandRTU Product Type: 2K (2 component) Adhesive, Polyurethane (PU) Adhesive, Solvent free (100% Solids) Adhesive
Application Area: Floor, Indoor Areas, Insulation Board, Laminate Floor, Multi-Plywood Flooring, Outdoor Areas, Parquet Flooring, Pre-Finished Wooden Flooring, PVC Sheets, PVC Tiles, Rubber Sheets, Tile, Wood-Plank Flooring
Compatible Substrates & Surfaces: Elastomers & Rubbers, Expanded Polystyrene (EPS), Extruded Polystyrene (XPS), Polyisocyanurate, Polyvinyl Chloride (PVC), Wood
Application Method: Brush, Roller, Trowel
Chemical Family: Polyurethanes (PU)
Features: Easy To Apply, Excellent Flowability, Excellent Multi-Substrate Adhesion, Excellent Spreadability, Fast Setting, Good Bonding Strength, Low Odor, Moisture Resistant, Solventless, Very Low VOC Emission, Weather Resistance
-
Type Document Name
-
Technical Data SheetFLX 570 Product Data Sheet
Enhanced TDS
Identification
- Chemical Family
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
Applications & Uses
- Uses
-
Uses : FLX 570 is ideal for bonding rubber tiles/sheets, PVC sheets, PVC tiles, parquet, multi-ply and pre-finished wooden flooring, wood-plank flooring and laminate flooring. Note: Test the substrate in accordance with applicable standards. Careful substrate testing is recommended in wooden flooring work. FLX 570 is also recommended for bonding various insulation boards such as EPS (expanded polystyrene), XPS (extruded polystyrene), PIR (polyisocyanurate).
Surface Preparation : The surface should be structurally sound, clean, dry, leveled and free from dust, curing compounds, grease and other loose debris. Keep container closed when not in use.
Application Procedure : Prime absorbent and porous substrates with FLX 530 primer. On very uneven or very rough surfaces, apply FLX 550 self levelling compound after primer application. Pour the FLX 570 adhesive out of the container but do not scrape out remnants as they may not be totally mixed and may not cure. Use the FLX 570 adhesive immediately. Apply the FLX 570 adhesive using a suitable notched trowel @ 0.25 to 0.4 kg/m2 per layer, depending on the porosity of the substrate. Immediately lay in the wooden flooring with a light sliding movement and knock it into place well. Curing time is dependent on atmospheric conditions and temperature. Curing will be considerably retarded at temperatures below 10oC. Bulk product in the bucket will cure faster than the film spread on the substrate, due to chemically induced heat build-up during the curing process. This temperature increase is negated once adhesive is spread. Higher temperatures will generally increase curing speed and reduce open time.
Clean-Up : Clean with warm water and soap when wet. Mineral spirit, when dry.
Features
- Ready-to-Use Product Features
Features & Benefits
- Labeling Claims
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
-
Packaging :
Content Packaging Pcs Per Pallet 8kg Kit Pail + Can 96
Physical Properties
- Color (Properties)
- Physical Form
- Appearance
-
Cream Viscous Liquid (Part A), Dark Brown Liquid - Hardener (Part B)
Properties
- Technical Data
-
Value Units Test Method / Conditions Coverage Range approx. 0.25 - 0.4 kg/m² - Cure Time (initial, adhesive is resistant to mechanical strain) 6 - 8 hours - Pot Life (at 27°C, mixture) 30 minutes - Service Temperature Limits min. 10 °C - Solids Content 98 - 100 % - - Appearance
-
Cream viscous liquid (Part A), dark brown liquid - hardener (Part B)
Storage & Handling
- Shelf Life and Storage Conditions
-
Shelf life is 12 months from date of manufacturing in original unopened containers. Store under cover, protect from direct sunlight and high temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. Handle packaging with care. Rotate stock on a “first in-first out” basis.
- Shelf Life
-
12 months