FULLABOND 713 OB
1 of 29 products in this brandFULLABOND 713 OB is a low viscosity adhesive specifically designed for the efficient forming of cartons using medium to high-speed HHS and Valco equipment. This adhesive is formulated with a UV dye that emits a yellow-green glow when exposed to UV light, allowing for easy detection. It offers several benefits, including a high initial tack level and good grab, ensuring reliable bonding. With its clean cut off and no build-up during running, FULLABOND 713 OB ensures smooth operations. The adhesive can be detected using deep blue lighting and a yellow color filter. FULLABOND 713 OB is typically used for the forming of cartons through medium to high-speed equipment, especially when working with standard corrugated board.
Application Area: Cartons, Carton Seam
Application Method: Nozzle
Features: Fast Grab, Fast Setting, High Initial Tack, Low Viscosity
-
Type Document Name
-
Technical Data SheetFULLABOND 713 OB Technical Data Sheet
Enhanced TDS
Identification
- GBU
- Categories
Applications
- Application Area
- Application Method
- Segment
Applications & Uses
- Application Information
-
- Is primarily designed to be applied by nozzle.
- For optimum performance this product should be used within operating temperatures of 15°C to 30°C.Ensure substrates are free form oils dirt or grease.
- Clean up adhesive while wet with warm water.
- Application Method
-
Forming of cartons through medium to high speed equipment where standard corrugated board is used.
l - Limitations
-
Check machine and material compatibility prior to commercial use.
Features
- Ready-to-Use Product Features
Features & Benefits
- Product Benefits
-
- High initial tack level
- Good grab
- Clean cut off
- No build up during running
- Detection via a deep blue lighting; color filter yellow
Packaging & Availability
- Regional Availability
Properties
- Density:
-
1060 kg/m³
- Shelf Life:
-
12 months
- Solid Content:
-
38~45 %
- Viscosity:
-
300~375 cps
- Application Properties
-
Value Units Test Method / Conditions Application Temperature 15 - 30 °C - - Typical Properties
-
Value Units Test Method / Conditions Raw Material Base Synthetic polymer emulsion - - Solids Content approx. 38 - 45 % - Specific Gravity approx. 1.06 - - Storage Temperature 15 - 30 °C -
Storage & Handling
- Storage Condition
-
- Product should be stored in the original container out of direct sunlight between 15°C and 30°C and be protected from freezing.
- Rotate stock using oldest batches first.
- Close containers air tight after use.
- Shelf Life
-
12 months